Cellulose Gasket Paper

A Cellulose Gasket Paper is made with plant fiber are used extensively in automotive and marine applications and in industrial sites such as oil refineries and distilleries. A gasket is used to create and retain a static seal between two flanges which connect a series of mechanical components while containing a wide variety of fluids. It is a large piece of sheeting intended to be used in making quick, cost-effective gaskets (seals), for joining surfaces or components together. The offered paper is made for use in the various commercial and industrial applications. The offered Gasket paper is basically sheeting that is used in the making of gaskets. The sheeting is purchased in various sizes and thicknesses. Cellulose Gasket Paper is very efficient.

KING SEAL 309 Gasket Sheet

Basis : It is a Cellulose fibre gasket material with Nitrile blinder, it is used in many Oil & Coolant application in the market. This material is an economical alternative for soft gasket applications like Oil/Fuel/Water areas, Carburettors,  Gear boexs, Oil Pans, Material Handling Equipment, Chemical Pumps & pipe Lines, Diesel Engines etc. It can be made available in any colour.

 

  • Material Quality : KINGSEAL 309
  • Specification : ASTM F-104 Type-3

 

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cc3  (ASTMF-36 )         

0.90 +/-1.05

Compressibility %  AT 70 kg/ cm2 (1000 psi)         

15-25%

Recovery (ASTMF36)         

>35% (min)

Tensile Strength Kg/cm2

>100 (min)

FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 50% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 50% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 60% (max)

THICKNESS INCREASE   

 

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 10% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 10% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 30% (max)

OPERATING TEMPERATURE         

 150 deg C 

 

King Seal Super

Basis : It is a cellulose fibre gasket material with controlled swell Nitrile rubber blinder. It is a suitable replacement for Asbestos fibre gasket materials, saturated paper.

Material Quality : KINGSEAL Super

Specification : ASTM F-104 Type-3

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cm3           

1.00 +/- 0.5

Compressibility 5000psi (ASTMF-36 )         

10-25%

Recovery (ASTMF36)         

30% (min)

Tensile Strength Kg/cm2

100 (min)

Loss of Ignition at 850 deg C

 

FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (5 Hrs 21 to 150 deg C )      

 50% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 50% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 60% (max)

THICKNESS INCREASE   

 

ASTM Oil No.3 (5 Hrs 150 deg C )      

 10% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 10% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 35% (max)

OPERATING TEMPERATURE         

 150 deg C 

 

King Seal 7700

Basis: It is a cellulose fibre gasket material suitable for any type of sealing applications such as material handing equipments, chemical pumps and pipelines diesel engines, oil/ fuel/water pumps, carburettor, gear boxes, oil pans etc.

Material Quality : KINGSEAL 7700

Specification : ASTM F-104 Type-3

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cm3           

 0.85 +/- 0.05

Compressibility 5000psi (ASTMF-36 )         

15-25%

Recovery (ASTMF36)         

35% (min)

Tensile Strength Kg/cm2

140 (min)

Loss of Ignition at 850 deg C

 

FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (5 Hrs 21 to 150 deg C )      

 40% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 50% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 65% (max)

THICKNESS INCREASE   

 

ASTM Oil No.3 (5 Hrs 150 deg C )      

 8% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 10% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 35% (max)

OPERATING TEMPERATURE         

 150 deg C 

 

KING SEAL High Pressure-15

KING SEAL  High Pressure-15

KS High Pressure-15 is a mix of synthetic fibres having cellulose component in it with high levels of nitrile and synthetic rubber binders. Primarily used in low-medium pressure Compressors, Diesel Engines & other applications. It has excellent low flange pressure seal-ability and bolt torque retention. It is intended for applications with max. temperature upto 210 Degree C.

Material Quality : High Pressure

Specification : ASTM F-104 Type-7

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cc3  (ASTMF-36 )         

1.45 - 1.55

Compressibility %  AT 70 kg/ cm2 (1000 psi)         

13-25

Recovery (ASTMF36)         

>40% (min)

Tensile Strength Kg/cm2

>110 (min)

FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 20% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 20% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 

THICKNESS INCREASE   

 

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 8% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 8% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 

OPERATING TEMPERATURE         

 210 deg C 

  

KING SEAL and MULTIFLEX - 95

KING SEAL MULTIFLEX -95

MULTIFLEX-89  is a reinforced cellulose material FOR multipurpose use in coolant and oil applications with excellent properties adhering to compressibility, strength & sealability.  Available in green, Red and Yellow colour. It can sustain maximum temperatures upto 195 Degree C.

  • Material Quality : MULTIFLEX -95
  • Specification : ASTM F-104 Type-3

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cc3  (ASTMF-36 )         

1.45 min

Compressibility %  AT 70 kg/ cm2 (1000 psi)         

10-20%

Recovery (ASTMF36)         

>40% (min)

Tensile Strength Kg/cm2

>100 (min)

FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 40% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 40% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 

THICKNESS INCREASE   

 

ASTM Oil No.3 (22 Hrs 21 to 30 deg C )      

 10% (max)

ASTM Fuel B (22 Hrs 21 to 30 deg C)     

 10% (max)

Water Distilled (22 Hrs 21 to 30 deg C)     

 

OPERATING TEMPERATURE         

 195 deg C 

 

King Seal 9080

Basis: It is a mix of reinforced fibres cellulose fibre and nitrile composition with outstanding sealing characteristics. This material can be used for soft gasket applications like oil/fuel/ water carburetors, gearboxes, oil pans etc.

Material Quality : KINGSEAL 9080

Specification : ASTM F-104 Type-7

Product Details:

CHARACTERISTICS    

SPECIFIED VALUES

Density gm/cm3           

 1.25 +/- 0.05

Compressibility 5000psi (ASTMF-36 )         

15-30%

Recovery (ASTMF36)         

35% (min)

Tensile Strength Kg/cm2

110 (min)

Loss of Ignition at 850 C


FLUID ABSORPTION       

 

Weight increase      

        

ASTM Oil No.3 (5 Hrs 21 to 150 deg C )      

 40% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 40% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 40% (max)

THICKNESS INCREASE   

 

ASTM Oil No.3 (5 Hrs 150 deg C )      

 20% (max)

ASTM Fuel B (5 Hrs 21 to 30 deg C)     

 20% (max)

Water Distilled (5 Hrs 21 to 30 deg C)     

 20% (max)

OPERATING TEMPERATURE         

 180 deg C 

 

X


"We mainly deal in Bulk Orders."
Back to top